Rust-Oleum Caliper Paint, Red - 251591

The Rust‑Oleum 251591 Caliper Paint, 12 oz, Gloss Red is a high-performance, oil-based aerosol coating crafted specifically for automotive brake components. Designed to endure severe conditions, this durable enamel delivers a vibrant gloss finish while protecting calipers, drums, rotors, and springs.

FEATURES & BENEFITS

• High-Temperature Resistance: Engineered to withstand intermittent heat up to 900 °F, making it ideal for brake calipers and related parts.
• Brake Dust Resistant: Formulated to repel brake dust for a cleaner, longer-lasting appearance.
• Any‑Angle Spray Technology: Enables spraying at any angle—even upside down—allowing for effortless access to tight or awkward areas.
• Comfort Spray Tip: Features a wider finger pad to reduce hand fatigue during extended use.
• Gloss Red Finish: Delivers a striking, shiny enamel that enhances wheel aesthetics and masks grime.
• Robust Durability: Sturdy, oil-based formula resists chipping, peeling, corrosion, and road debris.
• Coverage: Each can covers approximately 8–10 sq ft—enough for multiple brake components.

APPLICATION TIPS

• Surface Prep: Thoroughly clean using brake cleaner or soap and water. Remove all grease, rust, old paint, and brake dust (using HEPA vacuum if needed). Lightly scuff with 320‑grit sandpaper, then dry. Mask off surrounding areas.
• Shake Well: Shake can vigorously for at least 1 minute after the mixing ball rattles; continue shaking during use.
• Apply Paint: Hold the can 10–16″ from the surface, spraying steady overlapping strokes. Apply multiple light coats—about 20 minutes apart. All coats should be applied within 1 hour of prep.
• Dry & Recoat: Dries to touch in ~20 minutes, ready to handle in 1 hour. Recoat within 1 hour or after 24 hours for best results. Full cure in ~7 days.

SAFETY INFORMATION

• Flammability: Extremely flammable aerosol. Use only outdoors or in well-ventilated areas—keep away from heat, sparks, flames, and hot surfaces.
• Ventilation Required: Avoid inhalation of vapors. Wear a suitable respirator in enclosed spaces.
• Protection: Use gloves, eye protection, and protective clothing. In case of contact, rinse thoroughly and seek medical advice if irritation occurs.
• Storage & Disposal: Clear the nozzle by inverting and spraying until empty. Store below 122 °F (50 °C), away from sunlight. Dispose of container as per local regulations .

*Product images are for illustrative purposes only and may differ from the actual product.