
Rust-Oleum Adhesion Promoter, Clear - 251572
by Rust-Oleum
Original price
G$0
Original price
G$2,300.00
-
Original price
G$2,300.00
Original price
Current price
G$2,300.00
G$2,300.00
-
G$2,300.00
Current price
G$2,300.00
The Rust‑Oleum 251572 Adhesion Promoter Spray, 11 oz, Clear is a fast-drying primer specifically formulated to improve paint adhesion on challenging automotive substrates like plastics, vinyl, fiberglass, and exterior trim. It primes the surface for a smooth topcoat finish and enhances durability across various painting applications.
FEATURES & BENEFITS
- Adhesion-Enhancing Formula: Bonds topcoats effectively to polyolefin plastics, vinyl, fiberglass, bumpers, and trim—great for prepping modern automotive surfaces.
- Fast-Drying Primer: Dries to the touch in about 10 minutes and is handle-ready by 15–30 minutes, speeding up project timeframes.
- Any-Angle Comfort Spray: Designed with an ergonomic wide pad and 360° spray tip, allowing you to reach awkward or inverted angles comfortably.
- Clear Finish, Invisible Prep: Transparent primer that won't alter the color of your topcoat.
- Good Coverage: Each 11 oz can covers approximately 10–12 ft², offering efficient surface prep per can.
APPLICATION TIPS
-
Surface Prep
Thoroughly clean with soap and water, then remove any wax, grease, or residue. Rinse and dry completely. Lightly sand glossy areas, and use mineral spirits to degrease. -
Shake Well
Vigorously shake the can for at least 1 minute after the mixing ball begins to rattle. Shake occasionally during use. -
Spray Technique
Hold the can 12–16 inches from the surface. Apply 2–3 light, even coats with slight overlap, keeping the can in motion. -
Dry & Topcoat
Let it dry for 10 minutes (touch dry) and up to 30 minutes for handling. Apply your topcoat within 10 minutes of primer application for best adhesion.
SAFETY INFORMATION
- Flammable Aerosol: Use only in well-ventilated areas. Keep away from heat, sparks, open flames, and hot surfaces.
- Ventilation & PPE: Avoid inhaling vapors—wear a respirator if indoors or in low-ventilation environments. Use gloves and eye protection.
- Cleanup & Storage: Invert can and spray until clear to clean nozzle. Store below 120 °F and dispose of the aerosol can according to local regulations.
*Product images are for illustrative purposes only and may differ from the actual product.