Rust-Oleum 500° Engine Enamel, Aluminum - 366428

The Rust‑Oleum 366428 Engine Enamel Spray Paint, 11 oz, Aluminum is a ceramic-enhanced, oil-based aerosol coating designed for automotive engines and other metal components exposed to intermittent heat. Ideal for engine blocks, valve covers, manifolds, and other parts reaching up to 600 °F (315 °C), this enamel delivers a smooth, durable, high-gloss finish with superior protection.

FEATURES & BENEFITS

• High Heat Resistance: Withstands intermittent heat up to 600 °F, offering increased durability over the previous 500 °F formula.
• Ceramic-Enhanced Formula: Delivers outstanding color retention, chemical and fuel resistance, and a protective barrier against oil, grease, rust, and humidity.
• Stops Rust Technology: Built-in corrosion inhibitors help prevent rust on engine surfaces.
• Gloss Aluminum Finish: Provides a sleek metallic sheen to refresh and customize engine compartments.
• Any‑Angle Comfort Spray Tip: Enables spraying at any orientation—even upside down—with a wide finger pad to reduce user fatigue.
• Fast Drying & Coverage: Dries to the touch in about 20 minutes, covers up to 10–12 sq ft per can, and is ready to handle in approximately 1 hour.

APPLICATION TIPS

• Surface Preparation
  Remove loose paint, rust, oil, and grease. Lightly scuff smooth surfaces with sandpaper and clean thoroughly.
• Shake the Can
  Shake vigorously for at least 1 minute after the mixing ball rattles. Shake periodically during use .
• Spray Technique
  Hold can 10–16 inches from the surface. Apply multiple light, even coats in a steady, overlapping motion .
• Drying & Recoat
  Dries to touch in about 20 minutes; fully cured in 24 hours. Recoat any time after initial dry without sanding. For best protection, let parts cool completely before exposure to heat cycles.

SAFETY INFORMATION

• Flammability: Highly flammable aerosol—use only in well‑ventilated areas and away from heat, sparks, open flames, or hot surfaces.
• Ventilation & Protection: Wear respiratory, eye, and skin protection to avoid inhaling vapors or contact with skin.
• Cleanup & Storage: Invert can and spray for 2 seconds after use to clear nozzle. Clean overspray with mineral spirits or acetone. Store below 120 °F and dispose of according to local regulations.

*Product images are for illustrative purposes only and may differ from the actual product.