Rust-Oleum Adhesion Promoter, Clear - 251572

The Rust‑Oleum 251572 Adhesion Promoter Spray, 11 oz, Clear is a fast-drying primer specifically formulated to improve paint adhesion on challenging automotive substrates like plastics, vinyl, fiberglass, and exterior trim. It primes the surface for a smooth topcoat finish and enhances durability across various painting applications.

FEATURES & BENEFITS

• Adhesion-Enhancing Formula: Bonds topcoats effectively to polyolefin plastics, vinyl, fiberglass, bumpers, and trim—great for prepping modern automotive surfaces.
• Fast-Drying Primer: Dries to the touch in about 10 minutes and is handle-ready by 15–30 minutes, speeding up project timeframes.
• Any-Angle Comfort Spray: Designed with an ergonomic wide pad and 360° spray tip, allowing you to reach awkward or inverted angles comfortably.
• Clear Finish, Invisible Prep: Transparent primer that won't alter the color of your topcoat.
• Good Coverage: Each 11 oz can covers approximately 10–12 ft², offering efficient surface prep per can.

APPLICATION TIPS

• Surface Prep
  Thoroughly clean with soap and water, then remove any wax, grease, or residue. Rinse and dry completely. Lightly sand glossy areas, and use mineral spirits to degrease.
• Shake Well
  Vigorously shake the can for at least 1 minute after the mixing ball begins to rattle. Shake occasionally during use.
• Spray Technique
  Hold the can 12–16 inches from the surface. Apply 2–3 light, even coats with slight overlap, keeping the can in motion.
• Dry & Topcoat
  Let it dry for 10 minutes (touch dry) and up to 30 minutes for handling. Apply your topcoat within 10 minutes of primer application for best adhesion.

SAFETY INFORMATION

• Flammable Aerosol: Use only in well-ventilated areas. Keep away from heat, sparks, open flames, and hot surfaces.
• Ventilation & PPE: Avoid inhaling vapors—wear a respirator if indoors or in low-ventilation environments. Use gloves and eye protection.
• Cleanup & Storage: Invert can and spray until clear to clean nozzle. Store below 120 °F and dispose of the aerosol can according to local regulations.