Rust-Oleum High Heat,Flat Aluminum - 248904

The Rust‑Oleum 248904 High Heat Flat Aluminum Protective Enamel Spray Paint, 12 oz is a professional-grade, oil-based aerosol designed to protect and renew surfaces exposed to extreme intermittent heat—up to 2,000 °F (1,093 °C). Featuring a flat aluminum finish, this enamel is ideal for engine parts, exhaust systems, grills, and industrial equipment, offering excellent rust protection and heat resistance.

FEATURES & BENEFITS

• Extreme Heat Protection: Withstands intermittent temperatures up to 2,000 °F, perfect for exhaust manifolds, headers, barbecue grills, furnaces, and more.
• Flat Aluminum Finish: Provides a sleek, non-glossy metallic look that helps mask surface imperfections while maintaining a rugged, industrial aesthetic .
• Rust‑Preventive Formula: Stops Rust additives protect against corrosion from oil, moisture, salt, and grime, keeping surfaces resilient under heat and harsh conditions .
• Oil-Based Enamel Durability: Resists chipping, peeling, and fading; bonds strongly to bare metal for long-lasting protection.
• Any-Angle Spray Tip: Enables painting at any angle—straight, upside-down, or awkward positions—while easing finger fatigue for extended use.
• Coverage: One 12‑oz can delivers approximately 6–10 sq ft of coverage, depending on coat thickness.

APPLICATION TIPS

• Surface Prep
  Remove oil, grease, rust, and loose paint using detergent, wire-brush, or sandpaper. Ensure the area is completely clean and dry.
• Shake Well
  Shake can vigorously for at least 1 minute after the mixing ball rattles; shake occasionally during use .
• Spray Technique
  Hold the can 8–12″ from surface. Apply multiple light, sweeping coats with slight overlap to avoid runs and achieve even coverage .
• Drying & Recoat
  Dries to the touch in about 30 minutes; ready to handle in 1–2 hours. Recoat any time after the first hour for optimal results.
• Heat Curing (Optional for Tougher Finish)
  • Off-vehicle parts: Gradually cure in an oven—250 °F for 30 min, then cool; repeat at 400 °F and 600 °F.
  • On-vehicle parts: Run or idle engine in intervals—10–30 min—allow cooling between cycles to fully cure and strengthen finish.

SAFETY INFORMATION

• Flammability: Extremely flammable aerosol—keep away from heat, sparks, open flames, and hot surfaces .
• Ventilation: Use only outdoors or in a well-ventilated area. Vapors may cause dizziness—wear a respirator if needed.
• Protection: Wear gloves, safety glasses, and protective clothing to avoid contact with skin or eyes.
• Cleanup & Disposal: Invert the can and spray until empty to clear the nozzle. Clean overspray with mineral spirits. Store below 120 °F and dispose of the can in accordance with local regulations .

*Product images are for illustrative purposes only and may differ from the actual product.